To create Device filtering Policy, below mentioned Processes can be followed:
1. To create Device filtering policy.
2. To map the Device policy into the security group.
3. To map the security group to the WLAN.
1. To create Device filtering policy:
Step1. Go to Profiles > Policy > Click on + Create Policy.
Step2.-A new pop-up will open, provide a Profile Name and Description.
-Select the Definition as- Device filtering Policy.
-Select Allow/Deny in Device type,
Allow- If you wish to provide the access to the Device types to be selected in next step.
Deny- If you wish to not to provide the access to the Devices selected.
-Select the device types. Possible options are:-
2. To map the Device policy into the security group.
Step1. Go to Profiles > Security Group > click on + Create Security Group.
Step2. -Provide the Profile Name, Description and select the Definition as Group
-Go to Group Details > Provide a Group name and choose Member type as per requirement.
Step3. Go to Device filtering Policy > Click on- Enable Device filtering Policy > Choose the created Device filtering Policy.
Step4. Go to Advance > Select the node mode Applicable for as Gateway / Bridge+Firewall > Click on Save.
3. To map the security group to the WLAN.
Step1. Go to Profiles > WLAN > click on + Create WLAN(to create a new WLAN) / Select any pre-existing WLAN( if Security group is to be mapped with already created WLAN).
Step2. -Provide a Profile Name, Description and Definition.
-Click on Group and select the create security group, that is to be mapped.
-For configuring network interface and other relevant information, while creating the WLAN(if creating a new WLAN). Kindly refer to- https://support.ray.life/en/support/solutions/articles/81000412321-network-lan-vlan-wlan-configuration
Thanks
Ray Support
support.ray.life