HOW TO ADD GATEWAY AND AP TO THE CLOUD
- Login to Cloud Controller using your username & password on https://cloud.ray.life
- Go to Appliances , Click on +Add Appliances to add devices.
- Press the "Add" button to add the device.
- Fill in the details such as the MAC address of the device and the Security code (last 6 digits of the Serial number)
- Select the desired option for assigning the device, either as an Access Point or Gateway.
- Select the mode as per the Your requirement (Gateway/ Bridge no Firewall/ Bridge+Firewall) As shown in below picture.
Notes:
- If you have a gateway device, it must be added in Gateway mode.
- If you only have an Access Point, you can configure it as Bridge + Firewall or Bridge No Firewall.
- If you have both a gateway and an Access Point, configure the gateway device in Gateway mode and the Access Point as Bridge No Firewall mode.
- Other Option: You can also add multiple devices simultaneously by using the given format.
- You may request this file from your distributor or create it manually. The format of the file is available via the "Download Sample File" link.
